features and specifications specifica tions tm-3000 universal crimp press 63801-7200 63801-7300 m olexs tm-3000 universal crimp press provides an effective method of applying a wide range of side and rear-feed terminals to pre-stripped discrete wire and cable. the tm-3000 press is an inexpensive, electrically-controlled, direct-drive press designed for mid-volume, semi-automatic bench operations. this industry standard press will accept the most common industry standard applicators in the market place, thereby reducing tooling costs and providing production flexibility. this molex air-feed crimp press will also accept molex air-feed applicators that process product mounted on mylar* tape. refer ence information use with: fineadjust? and mini-mac applicators electrical 120v ac/60hz or der no. 63801-7200 240v ac/60hz order no. 63801--300 physical weight: unpacked 100kg (220 lbs.) packed 114kg (250 lbs.) mechanical air pressure: 75.80 psi min. (5.2 bar) 12.70mm (12.00") supply min. air v olume: 3.2 scfm min. production rate: 2,400 terminations max. (dependent upon operator skill, product selection and wire length) features and benefits n accepts fineadjust? and mini-mac applicators with side and r ear feeds; uses most industr y standar d applicators reducing tool costs and providing production flexibility n direct-drive, split-cycle press accepts molex air-feed applicators for terminals mounted on tape n shut-height adjustment lever pre-set to industry standard 135.80mm (5.345") to accept industry standar d applicators and allow for adjustment to hit the crimp height tar get n re-settable count pr ovides accurate batch counting n meets osha safety and noise requirements reducing risk of injur y n safety interlock switch is attached to guard preventing press from cycling if guard is open during operation industry standard air-feed crimp press is ideal for discrete wire and cable applications *mylar is a registered trademark of e.i. du pont de nemours and company tm-3000 universal press with a molex air-feed applicator that processes product on mylar tape
applications tm-3000 universal crimp press 63801-7200 63801-7300 n automotive market n i ndustrial market n commercial market n contract manufacturers n assembly houses n design/engineering facilities americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 wellington ct. lisle, il 60532 u.s.a. 630-969-4550 fax:630-969-1352 visit our web site at http://www.molex.com/product/apptool/apptool.html order no. usa-319 rev. 1 printed in usa/ji/2005.09 ?005 molex ordering information order no. voltage hz 63801-7200 120v ac / 60hz 63801-7300 240v ac / 60hz this mini-fit plus hcs? terminal has been crimped using the molex tm-3000 press with a molex applicator
|
